Keel Cutter N450 Keel Cutter N600
Suitable types of material Steel, cast iron, asbestos, cement, plastic Steel, cast iron, asbestos, cement, plastic
Pipe Diameter (nominal o/d) 200mm to 750mm - 900m with extension chain 250 to 1500mm
Cutting Speed (approx) 140mm per minute 100mm per minute
Dimensions 190mm high x 350mm wide x 300mm long 340mm high x 530mm wide x 450mm long
Weight 20kg 36.5kg
HYDRAULIC UNIT
Oil Feed 20 Litres per minute 30 Litres per minute
Max pressure 140 bar(2000 PSI) 140 bar(2000 PSI)
BLADE TYPE
Diamond Cuts - Cast/Ductile Iron 125mm blade- cuts up to 20mm wall thickness 200mm blade- cuts up to 50mm wall thickness
150mm blade- cuts up to 32mm wall thickness
Tungsten Carbide Tipped (TCT) Cuts - Steel 125mm blade- cuts up to 20mm wall thickness 200mm blade- cuts up to 50mm wall thickness
PE Cutting Blade 160mm blade- cuts up to 35mm wall thickness 200mm blade- cuts up to 50mm wall thickness

Keel-Cutter 

Tel:      00971 4 2567368

Fax:     00971 4 2567369

Email:  eisfzcajman@gmail.com

Pipe cutting Equipment 


Keel cutters are an ideal method of cutting pipework when carrying out alterations and diversions - any instance where a circumferential cut is required on a pipe, even if it has been inserted or sliplined. The Keel Cutters can cut steel, cast iron, ductile iron, plastic, cement and other types of pipe up to 1500mm diameter. 


Two models are available as per specifications below:- 



Keel Cutter Brochure and product Sheets->